Muc-Off Pressure Washer Bicycle Bundle

1. Connect the pressure washer to a suitable mains power supply and mains water outlet.
2. Fit the bicycle-specific lance and rinse the bike thoroughly to remove loose dirt.
3. Attach the Snow Foam Lance directly to the Nano Tech Bike Cleaner bottle.
4. Adjust the foam setting and cover the entire bicycle with an even layer.
5. Allow the cleaner to work for 3–5 minutes without letting it dry.
6. Agitate stubborn dirt using a suitable bicycle-cleaning brush or sponge.
7. Refit the bicycle-specific lance and rinse the bicycle thoroughly.
8. Dry the bicycle using a clean microfibre polishing cloth.
9. Apply Bike Protect evenly to the frame and components while avoiding brakes.

Safety Instructions

• Read and retain all operating and safety instructions before use.
• Use only with a clean mains water supply and never operate the washer without water flowing.
• Do not use dirty, sandy or chemically contaminated water.
• Never direct the spray towards people, animals or electrical equipment.
• Keep electrical plugs and connections dry, raised from the ground and away from standing water.
• Do not touch the plug or electrical connections with wet hands.
• Do not operate the washer while standing in water or on an unstable surface.
• Keep children and other people away from the cleaning area.
• Maintain stable footing and ensure the work area has adequate drainage.
• Never pull or carry the unit using the hose; use the integrated handle.
• Use the appropriate lance and avoid concentrating the spray on delicate components.
• Apply Bike Protect away from brake pads, rotors and braking surfaces.
• Use cold water only and do not exceed the washer’s rated operating pressure.