SFR-1-BLK
Say goodbye to wet and muddy feet with the Ass Saver Speed Mullet Regular! This front mudguard is designed to keep your feet happy and dry on any bike, regardless of frame size or cables. Its quick and easy mounting system ensures a perfect fit every time, making it the go-to choice for any rider.
Key Features:
Easy, Quick, and Effective: The SPEED MULLET Regular is your perfect companion for any weather and terrain. Don't let rain or mud ruin your ride - stay comfortable and focused with this front mudguard.
Note:Ā Now has longer strap to accommodate all downtube sizes!
Ā
Stabilizer Tabs
The attachment features two tabs that folds in underneath the velcro strap. They provide stability so that the SPEEDĀ MULLET holds it's position even under rough conditions. They also make sure that the right angle is achieved, regardless if you have a thin steel frame or a fat carbon frame.
Cable Managment
Thanks to three silicone bumpers and the specific routing of the strap, two channels are formed between the frame and the mudguard. This enable theĀ SPEEDĀ MULLETĀ to work flawlessly with downtube mounted cables. If your cables are without cable housing they will run freely in the channels without scratching your frame and with no impact on your shifting.Ā
Exception!Ā
For safety reasons theĀ SPEEDĀ MULLET should not be used in connection with uncoveredĀ cables for the rear brake. This is not very common but if your bike has mechanical disc brakes, please make sure your downtube brake cable has housing before usingĀ SPEEDĀ MULLET.
Mounting Position
To give your feet the best protection, make sure to fold the outer edges of theĀ SPEEDĀ MULLET at almost 90 degrees so that they are facing forward and place the mudguard as close to the wheel as possible while still maintaining clearance for steering. If you are looking for maximum drivetrain protection, fold the outer edges just slightly and place theĀ SPEEDĀ MULLET further down, closer to the chainring.
Important Check
Just for safety, please check for steering clearance and brake function before each ride.
Material | 0.8 mmĀ PP (Polypropylene) |
Width | 47mm |
Fixing Method | Clip-on |
Weight | 30 g |